Personally, I moist clear my sensor a few times a month, relying on how dusty my varied adventures are. Simply put, although, I don’t recommend another sensor cleaning solution that really touches your sensor. No static brushes, no sticky goop-on-a-stick, and completely beneath no circumstance must you ever strive placing tape on your sensor.

I do crack open a fresh swab whenever another person pays me to clean THEIR sensor, after all, but I’ll in all probability re-use that same swab on my own sensors later. To date, after the 12+ skilled APS-C and Full-Frame cameras I’ve owned, and the tons of of occasions in whole that I’ve cleaned all their sensors, I’ve never scratched a sensor. You don’t want to put an excessive amount of cleaning resolution on the swab, otherwise you’ll risk dripping complete drops of answer onto your sensor, and potentially the encompassing electronics. Not enough cleansing answer, and also you’ll be “scraping” a dry swab throughout your dusty, soiled sensor, which might be bad if any of the mud is in reality onerous/sharp.

The factor is, sensor cleaning equipment usually solely prices about that a lot. The “authentic” sensor swab is simply $35, and it comes with twelve swabs. Right off the bat, it seems like a probably good value.

Before continuing with this method, please do not forget that you will by no means be swabbing the precise sensor of your camera. All camera sensors have a plain glass sheet positioned in front of them.

It is the glass in entrance of your sensor that you may be cleansing. Regardless, if you do scratch it, you will need to ship your digicam off for repair. But, with care, it is unlikely that you'll scratch the glass in front of the sensor.