◔Cleanmo’s CM-FS708 Industrial Cleanroom Foam Swab is a good substitute for ITW Texwipe Foam Swab TX708A Foam swab .
◔ Cleanmo CM-FS708 Circular Head Cleaning Foam Swab is a large, general-purpose swab for cleaning curved surfaces. It use 100% Compressed polyurethane foam from Japan which is 100 pores per inch and free from organic contaminants such as silicone, amides or phthalate esters. Its closed-cell polyurethane foam head possesses excellent durability ，absorbency and cushioning.
◔ Polypropylene handle is compact and will not contribute to particulate or organic contamination.A rigid internal paddle provides firm support. The large polypropylene handle enables good control and ease of use.
◔More than 100 types swab can meet your different application .
◔ Rounded polyurethane foam head over rigid paddle
◔ Washed by EDI pure water
Low non-volatile residue
Low in both particles and ion content
◔ Doubled layered foam head
Excellent solvent-holding capacity
Compatible with most common solvents
◔ Thermal bonded
No contaminating adhesives or coating produce second pollution
Laundered and packed under an ISO Class 5 Cleanroom
|Particles, Readily releasable|
|Particles 0.5 um||<6000 counts/swab|
|DI Water||<1.18 mg/swab|
|Total anions||<2.4 ug/swab|
❈ Technical Details
❈ Drawing and Size
|Part NO.||head material||head width||head thickness||head length||handle material||handle width||handle length||total length||packing|
|50 swabs/bag 50bags/ctn|
Packing material：PO bag
Label on the packing can be designed as your requirement.
❈ Product Application
- Micro-mechanical cleaning
- Remove contamination from connectors and disk drives
- Effectively clean small, hard to reach areas with solvents such as IPA
- Remove flux residue and excess materials
- For general purpose cleaning