◔ Cleanmo’s CM-FS706 Keyboard Cleaning Foam Swab is a good substitute for ITW Texwipe Foam swab TX706A.
◔ Cleanmo's foam swab of CM-FS706 use 100% Compressed polyurethane foam from Japan which is 100 pores per inch and free from organic contaminants such as silicone, amides or phthalate esters.Polypropylene handle is compact and will not contribute to particulate or organic contamination and enables good control and ease of use.
◔ CM-FS706 is Keyboard Cleaning foam Swab which has been specifically designed to clean keyboards and keypads. Its closed-cell polyurethane foam head possesses excellent durability for scrubbing stubborn dirt. A thin internal paddle provides support when cleaning between keys.
◔ More than 100 types swab can meet your different application .
◔ Washed by EDI pure water
Low non-volatile residue
Low in both particles and ion content
◔ Doubled layered foam head
Excellent solvent-holding capacity
Compatible with most common solvents
◔ Thermal bonded
No contaminating adhesives or coating produce second pollution
Laundered and packed under an ISO Class 5 Cleanroom
|Particles, Readily releasable|
|Particles 0.5 um||<6000 counts/swab|
|DI Water||<0.95 mg/swab|
|Total anions||<1.80 ug/swab|
❈ Technical Details
❈ Drawing and Size
|Part NO.||head material||head width||head thickness||head length||handle material||handle width||handle length||total length||packing|
|CM-FS706 (TX706A)||sponge||10.9mm 0.429"|
Packing material：PO bag
Label on the packing can be designed as your requirement.
❈ Product Application
- Micro-mechanical cleaning
- Remove contamination from connectors and disk drives
- Effectively clean small, hard to reach areas with solvents such as IPA
- Remove flux residue and excess materials
- For general purpose cleaning