high quality digital check cleaning cards broader width factory for scanner cleaning

◔This Presaturated Cleaning Card is design to clean successfully as it transports through the feed path cleaning the Sensitive Magnetic Heads, Lens, and Transport Rollers. This card prevents processing delays and misreads as it removes contaminants from check reader/scanner/MICR feed paths, rollers, and heads.

◔ Larger Surface Cleaning Card with a Broader Width and Longer Length design allowed the Scanner to Clean more Effectively and Efficiently.

◔ Preventive Maintenance Cleaning Cards have been embraced by OEM’s to provide a Positive Cleaning Performance and extending the Service life of the Check Scanner

◔ Sizes Configuration are available with Standard thickness of Tolerance : 0.012” +/- 0.003” or (0.305 +/- 0.0762 in mm)

   - 2.0 x 6.0 (inches) or 50.8 x 152.4 (mm)
Part Number : CSCC- 0206

   - 2.5 x 6.0 (inches) or 63.5 x 152.4 (mm)  
Part Number : CSCC- 2506

   - 4.0 x 6.0 (inches) or 101.6 x 152.4 (mm)  
Part Number : CSCC- 0406

   - 4.375” X 8” X 0.018” or 111 X 203 （mm)  
Part Number : CSCC- 437508

◔ Reduces residue build-up without dismantling equipment

◔ Quick, easy, inexpensive preventative maintenance

   - Recommended Usage: Once per day in high use areas and once per week in low use areas.

Notice how much dirt is removed from this validator, and it’s only been 2 weeks since its last cleaning! 

Part 1

 Remove Check Scanner Cleaning Card from pouch.                                                                                                                                                                                                                          

Part 2

To clean the magnetic head and lens plates, insert cleaning card into hopper as you would insert a standard check, then choose scan cycle and allow card to pass through the scanner. Reuse the card by flipping it top to bottom and repeating the process several more times.

Part 3

 To clean the drive rollers, choose scan cycle while holding onto the trailing end of the card.

Part 4

   Dispose of card                                                                                                                                                         

Note:   If after completing step 3 the card is completely soiled, repeat the entire process with a new card. We recommend performing this maintenance every 2 weeks, but this time frame may need to be changed depending on your machine’s usage. 

Packing

Cleanmo

Packing material:Paper Box
Packing details:25 Pre-saturated Cleaning Cards

◔ This kit can be used with :

-  Digital Check TellerScan - TS200, TS210, TS220 & CheXpress™ CX30 Check Scanner Panini Check Scanner Vision X

- MagTek Check Scanner Canon CR-55 Check Scanner Kodak i6090 Check Scanner NCR TS 230-100 Check Scanner

- Unisys Smart Source Pro Check Scanner Epson CaptureOne 30 Check Scanner Seac Banche RDS 3000 Check Scanner Visionshape CS 470/480 Check Scanner